Home Page
Company Profile
Showroom
  Sensors
  Electronic Liquid Level Controllers & Indicators
  Process Control Equipment & Instruments
  Instrumentation
 
ANADIG SYSTEMS
CT-072 Maazine Temperature Sensor
To inquire, Select Product/s & Click on

Product Code : 05

[Select]
Product Specification
CT-072 Maazine Temperature
  • Temperature range controlled by the instrument 0 to 100°C
  • Set point is adjusted by keyboard which is provided on the backside of the front door.
  • Supply 127VAC, 50Hz
  • Power consumption not greater than 24VA with cos 5 not less than 0.6
  • Relay contact which are connected to annunciator 5 A 230VAC resistive
  • The length of connection system line between thermometer RTM and measuring unit junction box and is not greater than 30m and that between junction box and measuring instrument was 150m.
  • The instrument will operate continuously for period of 3000hrs without direct local maintenance as well as intermittently with unlimited amount of switching.
  • Intervals between operation period can be used for making replacement trueing and cleaning.
  • Signaling error at set point is not greater than ±1.5°C
  • Operation error of the instrument with thermometer error considers is not greater than ±2.5°C.
  • Instrument accuracy is not influenced by the following variation of the supply voltage and frequency.
    • Continuous variation Voltage ±10%, Frequency ±2.5%
    • Repeated short term variation
    • Voltage from minus 13 to plus 8%
    • Frequency from minus 4 to Plus 3.5%
  • Electric resistance for instruments circuits against case and against each other will be 20meg at 25°c±10°C
  • The enclosure of the instrument is of IP-65 type.
  • The instrument has relay contact of output potential free which are given to annunciator.
  • The instrument has auto manual switch to stop scanning of the channel at required stage.
  • The instrument has provision to check T/C ground and T/C open provision on front panel.
  • The instrument has provision of checking front panel Led and display with signal check switch.
  • The individual alarm will be indicated by coloured LED mounted on the front panel.
  • Common relay output has been provided for sixteen groups.
  • There are total 72 channel i.e 72 location of T/C, which is divided into 16 groups.
  • There is also provision of low and high alarm set point with the help of Keyboard
  • The channel number is indicated by 2 seven segment display.
  • The parameter is indicated by 2 seven segment display.
  • The temperature is indicated by 4 seven segment display.
Other Products in 'Sensors' category
CT-642 GTC Exhaust Gas Temperature
CT-642 GTC Exhaust Gas Temperature 		TAK 022 GTG Temperature Sensors
TAK 022 GTG Temperature Sensors 		Flame Proof Sensor
Flame Proof Sensor 		TAK-011 Temperature Indication System
TAK-011 Temperature Indication System
 
<< Back
   CONTACT DETAILS
B-214, Shreyas Industrial Estate, Near Jay Coach, Goregaon (E), Mumbai - 400063, Maharashtra, India
Phone:91-22-65706237/65200933
Fax:91-22-26740714
Send Mail  
Contact Now
Key Personnel
Mr. K. V. Masurekar (Director)
Mobile:+919869864165, +919820516376

    
Copyright © 2009 by MICRO SYSTEMS INSTRUMENTS PVT. LTD. All Rights Reserved.